WELCOME TO THE

KIPPER2K AMIGA HARDWARE PAGE

Home

Links

Info

About

Contact

 

Here are the Fastmem boards  Installation guides

A508IDE Installation

 Not all kickstarts will autoboot and users should read the following webpage for all the current info on the IDE68K

http://www.students.tut.fi/~leinone3/ide/ide68k.html

A1000 and A2000 users

 This board will work on these Amiga's however the A1000 definately needs a different CPU adapter to enable it to fit properly and the A2000 probably does as well. Hopefully people can check and let me know of their findings. Soldering points will be different for these machines

Here is link to the A2000 installation

CDTV

The fastmem will work with the CDTV however, from what i am told the RAM has to be added using the add fastmem command so it will need a different CPLD. Let me know if you are using it for  the CDTV.

Here is link tohelp with the fastmem setup CDTV

 

 

      

Below are 2 pictures to assist in installing the 2 pin header on the A500+.  Rev 5 and 6A are also in the same locaton

 

 

 

 

Installation of the A604, A608 and Vampire

To install the A604 or A608 simply place it over the CPU and wiggle it gently until you feel all 4 corners of the socket are over the CPU.  Then you can use 2 fingers of each hand to press down firmly and evenly (Yellow circles indicate where to place your fingers.

  The Vampire is installed the same way (socket lower left, same as the a604/A608

 

 

 

 

 

 

 

 

kipper2k

2015